Water Presence and Leak Detection System
Water leaks can quickly cause significant damage in residential, commercial, and industrial environments. Implementation of a dependable water detection system is critical in safeguarding physical locations and protecting valuable assets. The WaterBug® system provides reliable protection and enables real-time notification of water presence, enabling immediate and actionable resolution. The WaterBug system is available in five different models for dependable water detection in a variety of applications.
Water Detection when liquid makes contact with probe
Contacts above floor level to prevent false floor condensation detection
Checks for water constantly, requires two positive checks for a valid alarm
Wireless sensors are available in 319MHz and 345MHz
Power Requirements : Batteries – replace battery with exact replacement every 5 years
with a 3V Lithium (x2)
Wireless Signal Range : 600 ft (200M), open air
Code Outputs : tamper, tamper restore, alarm, alarm restore, low battery
Transmitter frequency : 319.5 MHz or 345 MHz
Supervisory keep-alive interval : 70 minutes
RF Peak field strength : Typical 36000 uV/m at 3m
Operating Temperature : 32° to 122°F (0° to 50°C)
Storage Temperature : -40° to 140°F (-40° to 60°C)
Transmitter Dimensions : 2.5” H x 1” W x .5” D
Max cable length : 72″
Package Weight : .158 lbs.
Mounting : Mount to wall surfaces (vertical) as well as floor surfaces (horizontal) using screws
or adhesive tape included.
Case Material : ABS
Warranty : 1 Year Limited
